eMoMo TRG9PA 7-Button 8-Pin Control Switch USB

• This is the genuine TRG9PA control switch. It features 7 buttons and utilizes an 8-pin male connector, and is suitable for power recliners or lift chairs with 3 motors.
  
• The switch is mounted on the outer surface of the left-side armrest when facing the chair (the right side when seated in the chair).

Compatibility:

• This unit is a sub-model of the TRG series, with the full model TRG9PA. It is not cross-compatible with other TRG sub-models.
  
• Do not rely on appearance; always remove your switch from the armrest to verify the model number before purchasing.
  
• If your switch does not have a model number tag, check the serial number on its barcode sticker. This switch will replace yours only if your serial number meets all the following criteria:
  
  • Prefix: Usually begin with SN:E, SN:WT, or SN:ZE.
    
  • Model Code: The characters immediately following the prefix must be TRG9PA.
    
  • Check Digit: The character directly after "TRG9PA" must be a number or the letter V.

Features:

• 7-Button Control:
  
  • 2 buttons for headrest forward/backward
    
  • 2 buttons for lumbar forward/backward
    
  • 2 buttons for chair/footrest open/close
    
  • 1 center reset button: it resets the headrest, lumbar, and chair to the home position.
    
• 8-Pin male connector: connects to the footrest motor.
  
• USB Port: Provides 5V/2A output for charging mobile devices.

Package Includes:

• TRG9PA switch × 1
  
• Face plate × 1
  
• Screws × 2