eMoMo HX90HU2C2LN02 5-Button Switch with Type A+C USB Charging Port for Lift Chair and Power Recliner

• This is the genuine eMoMo HX90HU2C2LN02 switch, featuring 5 buttons, built-in Type A+C USB port, and 3 connectors. It is designed for power recliners, lift chairs, and other types of motion furniture.
  
• This switch is mounted on the right armrest when facing the chair (on the left side when seated).

Compatibility

• This switch is not cross-compatible with other eMoMo HX90 models. The HX90 family includes many sub-models that are not interchangeable even if they look identical, and the back label may only read "Model: HX90". Please check your existing switch before ordering.
  
• To confirm this switch will replace yours, check the Serial Number (SN) on the barcode label of your current switch. The SN must meet all three requirements below:
  
  • Prefix: The SN usually starts with SN:E, SN:ZWT, or SN:ZE.
    
  • Sub-Model: The characters immediately after the prefix must be exactly 90HU2C2LN02.
    
  • Suffix: The character immediately after 90HU2C2LN02 must be a digit (0–9) or the letter V.
    
• If yours does not match these requirements, send a photo of the barcode label to our customer support by email or through the form below, and we will help you find the correct replacement model.
  

Key Features

• 5-Button Control:
  
  • Four butterfly buttons: Easily adjust the chair up/down and headrest tilt.
    
  • Middle button: Short press for light control, long press to reset the chair to home position. 
    
• Dual USB Charging Port: Built-in Type A + Type C USB port (5V, 2.1A output) for charging mobile devices. 
  
• Three Connectors:
  • A 5-pin male plug for the linear actuator motor
  • A 2-pin connector for the LED light strip
  • A 2-pin connector for cup holder
    
• Cable Length: 
  
  • Main cable: 1.45m (4.75ft) 
    
  • Cup holder cable: 1.5m (4.9ft)
    
  • LED light cable: 1.5m (4.9ft)
    

Specification

• Model: HX90HU2C2LN02
  
• Button Count: 5
  
• Plug Count & Configuration: 1 × 5-pin male plug + 2 × 2-pin connectors
  
• USB Port Count: 2 (USB-A + USB-C, 5V/2.1A output)
  
• Cable Length: 1.45m (4.75ft) main cable + 1.5m (4.9ft) cup holder cable + 1.5m (4.9ft) LED light cable
  
• Face Plate Size: 103.5mm × 35mm (4.07" × 1.37")
  
• Mounting Hole Distance: 91mm (3.58")
  
• Install Block Dimension: 78.5mm × 28mm × 37mm (L × W × H) / 3.09" × 1.10" × 1.45"
  

Package Includes

• 1 x HX90HU2C2LN02 Switch
  
• 1 x Aluminum Switch Face Plate
  
• 2 x Mounting Screws