MLSK89-A2 6 Button 5 Pin Remote Controller for Recliner w/USB Charging Port & Backlit
MLSK89-A2 6 Button 5 Pin Remote Controller for Recliner w/USB Charging Port & Backlit
US orders ship from the US; international orders ship from China.
⚠️ This remote is not compatible with HSW306 models. Verify your current model number before purchase.
Couldn't load pickup availability
- This is the genuine MLSK89-A2 hand remote control, it is compatible with several Catnapper power recliner/lift chairs. If your remote controller has the same model number, this one will replace yours perfectly.
- The remote controller has six buttons, it controls the backrest raise/recline, seat lift up/down, legrest up/down.
- The remote controller has a USB charging port on the top, with a 5V 2A output, you can use it to charge your mobile devices.
- The buttons are Illuminated: makes it easy to operate in the dark nights
- Industry standard five pin plug.
- An extension cord is included.
Notes:
- Avoid using a battery pack to power the chair without connecting to wall outlet, the USB port and backlit will drain the battery quickly if the battery does not connect to the power source.
- In rare cases, button functions may be revised from your original remote (for example, the button that ought to control the headrest actually operates the footrest). This is due to variations in internal wiring and not a defect.
Compatible models:
Including but not limited to:
- 4847 Burns Power lift full lay flat recliner
- 4861 Oliver Power Lift Recliner w/Dual Motor and Extended Ottoman
- 764862 Wamer Power Headrest w/Lumbar Power Lift Lay Flat Recliner w/Dual Motor and Extended Ottoman
- 4867 Lofton Power Lift Recliner w/Dual Motor and Extended Ottoman
- This remote controller CAN NOT replace the HSW306 by HHC. If your remote controller is HSW306, please DO NOT order
Feature
- 6 Buttons: operates backrest up/down, seat up/down, legrest up/down
- 5 Pin round male plug
- Suitable for dual motor power recliner/lift chairs
- With USB charging port
- With backlit
Specification:
- Input: DC 29V
- Output: USB DC 5V 2A
Package includes:
- 1* Remote controller
Not the part you are looking for?
If you cannot find the part you need on our website, please fill out the form below. We will get back to you with a quotation within 1-2 business days.
I am SO happy. I did pick the correct remote (it had 5 pins but I didn't have a model number so was still a little unsure...) and it works great. The best, for me, is that the cord was just a plain electrical cord - the original remote that came with the chair was "curly". And this is what caused me to ruin the original remote. I have an end table next to the chair, and because my house is so small, the two items were pretty close to each other. The end table has a glass top, and the curly part of the remote cord would continue to get caught underneath it. Unfortunately, I yanked on it too hard, too many times, and pulled the cord from the contacts in the guts of the remote. I could still use it, but you had to wiggle the cord around so the wires made contact again, so it would operate. It also arrived a day earlier than projected - another bonus! Thanks so much!
Works well.
MLSK89-A2 6 Button 5 Pin Remote Controller for Recliner w/USB Charging Port & Backlit
Thank you for all your help on getting the correct controller.
I purchased the wrong controller, but they offered several alternatives to take care of my problem. Very easy to work with.
Reviews in Other Languages
Works like new!
- 5 stars: 7 (70%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 3 (30%)
I am SO happy. I did pick the correct remote (it had 5 pins but I didn't have a model number so was still a little unsure...) and it works great. The best, for me, is that the cord was just a plain electrical cord - the original remote that came with the chair was "curly". And this is what caused me to ruin the original remote. I have an end table next to the chair, and because my house is so small, the two items were pretty close to each other. The end table has a glass top, and the curly part of the remote cord would continue to get caught underneath it. Unfortunately, I yanked on it too hard, too many times, and pulled the cord from the contacts in the guts of the remote. I could still use it, but you had to wiggle the cord around so the wires made contact again, so it would operate. It also arrived a day earlier than projected - another bonus! Thanks so much!
I plugged it into the chair and it would not work at all.
Dear Customer,
Thank you for contacting us.
May I ask if the model number of your original remote controller is HSW306?
If so, this remote controller will not repalce yours - though they looks identical.
Works well.
The remote dosen't work. The light comes on but will not work
Dear Customer,
Per our email communication, this remote controller CAN NOT replace the HSW306 remote controller.
This remote controller can only operates 2 motors, and HSW306 controls 3 motors.
MLSK89-A2 6 Button 5 Pin Remote Controller for Recliner w/USB Charging Port & Backlit
While on the phone with a tech at the company, Even though we took photos with my phone to be sure we ordered the device with the correct number of plug pins the wrong device was delivered and the device could not be attached. Delivery took longer than expected too, 3 weeks. I’m not going to waste any more money and time trying to get the correct device. Just a bad investment.
Thank you for all your help on getting the correct controller.
I purchased the wrong controller, but they offered several alternatives to take care of my problem. Very easy to work with.
I would prefer to track my purchases, so I wouldn’t mind Using UPS or FedEx for the tracking purpose. Overall satisfied
Works like new!
Share
