Kaidi KDHM004A-007 7-Button Wireless Remote Controller for Adjustable Bed Base

This is the genuine Kaidi KDHM004A-007 wireless remote controller. It is designed for adjustable bed bases with two motors.

Compatibility

• This remote controller is not universal. It is a direct replacement for the KDHM004A-007.
  
• It suits Rize Home adjustable bed bases that use a remote controller with the same appearance.
  
• The remote controller also works with the KDDY109C-002 control box (part number 31202133).
  

Key Features

• 7-Button Control: Adjust the headrest and footrest, plus a memory function that saves the bed's position.
  
• Wireless Design: No cables to route or tangle, so it's easier to use. 
  

Pairing Instructions 

Before first use, pair the remote with your bed's control box.

• Scenario A - Control Box with a Pairing Button
  
  • Press and hold the pairing button on the control box for about 3 seconds to put it into pairing mode.
    
  • The pairing button's LED starts flashing. Pairing mode remains active for 15 seconds.
    
  • Within those 15 seconds, simultaneously press the head-up button and the foot-up button on the remote and hold them for 3 seconds.
    
  • Successful pairing is confirmed by a single beep from the control box, after which the pairing LED stops flashing.
    
• Scenario B - Control Box without a Pairing Button (Power-Cycle Method)
  
  • Disconnect power from the control box for at least 5 seconds, then reconnect the power.
    
  • The control box automatically enters pairing mode (the pairing LED, if present, will flash). This mode lasts for 15 seconds.
    
  • Within those 15 seconds, simultaneously press the head-up button and the foot-up button on the remote and hold them for 3 seconds.
    
  • Successful pairing is confirmed by a single beep from the control box, and the flashing stops (if an LED is available).
    

Clearing the Pairing

• In pairing mode, press and hold the head-down and foot-down buttons for three seconds. The remote's backlight flashes three times, the buzzer sounds, and the pairing is cleared.
  

Note

• This remote control requires three AAA batteries (not included).
  
• It is not recommended to operate multiple actuators at the same time.
  
• Please replace the batteries of the remote promptly. Remove the batteries if the remote won't be used for a long time.
  

Package Includes

• 1 × Kaidi KDHM004A-007 Remote Controller