eMoMo K20L(S)-1 5-Button Switch with USB & 90° 5-Pin Plug

This is a genuine eMoMo K20L(S) control switch. It features five buttons, controls two motors and an LED light strip, and uses a right-angled (90°) 5-pin male plug.

Compatibility:

This switch is not cross-compatible. It is designed to replace only the K20L(S) or K20L model (the K20L is black, while this switch is silver).

DO NOT order based on appearance or model number alone. ALWAYS remove your existing switch from the armrest and verify its serial number before purchasing.

Your switch’s serial number must match all of the following criteria. Otherwise, this switch will not be compatible:

• Prefix: Must begin with a code such as SN:E, SN:WT, or SN:ZE.
• Model Code: The digits following the prefix must be K20LS or K20L.
• Check Digit: The character immediately after “K20LS” or “K20L” must be a number or the letter V.

Installation Side:

When facing the chair:

• For the left side, if mounted on the outer surface.
  
• For the right side, if mounted on the inner surface.

Features

• Five Buttons: Controls chair Open/Close, lumbar forward/retract, and LED light On/Off.
• 90° Male 5-Pin Plug: Connects to the control box.
• USB Port: Provides 5V/2A output for charging mobile devices.

Package Includes:

• 1 x K20L(S) Switch
• 1 x Switch Face Plate
• 2 x Mounting Screws

Note:

If you are unsure whether the issue is with the switch or the control box, it is strongly recommended to order the control box together with the switch (the 2nd option of this listing).