eMoMo E312 2-Button Wireless Remote Controller for Ottoman bed, Gas-Lift Bed, and Hydraulic Bed

• This is the genuine eMoMo E312 wireless remote controller.
  
• It is designed for ottoman beds, gas-lift beds, and hydraulic beds that use the E312 control box.
  

Compatibility

• This remote controller is not universal. Please order it only if your existing remote controller or control box has the same model number: E312. 
  
• Please carefully check the Serial Number (SN). The SN must meet all three requirements below:
  
  • Prefix: The SN usually starts with SN:E, SN:ZWT, or SN:ZE.
    
  • Sub-Model: The characters immediately after the prefix must be exactly 312.
    
  • Suffix: The character immediately after 312 must be a digit (0–9) or the letter V.
    
• The serial number can be found on the remote controller or its accompanying control box. 
  
• If yours does not match these requirements, send a photo of the barcode label to our customer support by email or through the form below, and we will help you find the correct replacement model.
  

Note

• To Lock: Press and hold the Up and Down buttons together until the red light flashes, then release both buttons.
  
• To Unlock: Press and hold the Up and Down buttons together until the red light stays on, then release both buttons.
  
• To Pair:
  
  • Turn off power to the bed.
    
  • Press and hold the Up and Down buttons together until the red light flashes and then stays on.
    
  • Restore power to the bed.
    
• If you can't tell whether the fault is in the control box or the remote controller, we recommend replacing the entire kit (available as the second option in this listing).