JCHT35K9C Control Switch for Adjustable Desk JCHT35K-1 Compatible

Genuine JCHT35K9C control switch for lifting desk. Operates the up/down of the desk. The JCHT35K9C features 7 buttons, an LED display and a 10-core crystal plug. 

Compatibility:

• This switch is not cross-compatible. To ensure proper fit and function:
  
• Verify Model Number: Order this switch only if your original switch has the exact same model number: JCHT35K9C.
• Check Plug Type:
  
  • This switch utilizes a 10-core crystal plug.
    
  • Some older JCHT35K9C models use an 8-core crystal plug, or Conventional bend plug, or daughter plug.
    
  • If your current switch uses an 8-core plug, or Conventional bend plug, or daughter plug, this replacement will not be compatible.
    
• Compatible control box: JCB35N1/ JCB36N1; JCB35N2/ JCB36N2; JCB35N3/ JCB36N3; JCB35N4/JCB36N4; JCB35M/ JCB36M; JCB35NS1; JCB35NS2; JCB35MH3/JCB36MH3 
• This switch will replace the JCHT35K-1.

Features 

• LED display for height read-out in either cm or inches
  
• 4 memory positions 
  
• With a USB charging port, ideal for charging mobile devices.
  

Note: 

The desk switch must be reset after installation.

Reset Procedure:

1. Press and hold the Down Arrow to lower the desk completely.
2. Continue holding the button for 7 seconds until the display shows "ASR."
3. Release the button, then press the Down Arrow once more. The desk column will make a small lowering and raising movement.
4. The display will now show the actual height, confirming the reset is complete.

Your desk is now ready for use.

Specifications

• 4 Memory Buttons 
  
• Color: Black 
  
• Plug type: 10 core crystal plug.
  
• Cable length: 2.0m (appr 80 inches)