eMoMo HX90HULA 5 Button Switch for Power Recliner with Two Plugs & USB port

• This is the genuine eMoMo HX90HULA switch. It features 5 buttons and two plugs. It is suitable for power recliners or lift chairs equipped with 2 motors.
• The switch controls the chair open/close, headrest tilt, and LED ON/OFF.
• When facing the chair, this switch is for the left side armrest if mounted on the outside of the armrest, or for right side armrest if mounted on the inside of the armrest.

Features:

• Five Buttons: 
  
  • 4 butterfly-shaped buttons controlling headrest tilt and chair opening/closing.
    
  • The small center button with an arrow has two functions: long press resets the chair to upright position; short click turns ON/OFF the LED light.
    
• USB Charging Port: Features a built-in USB charging port outputting 5V at 2A, enabling mobile device charging while using the chair.
• Two plugs:
  • A male 5 pin plug connects to the footrest motor (cable length: 145cm/57 inches)
  • A 2-pin plug connects with the LED light stripe (cable length: 80cm/31.5inches). 

CRITICAL COMPATIBILITY CHECK

• The full model number of this switch is HX90HULA. Multiple HX90-series switches share identical appearances but are NOT interchangeable (e.g., HX90HUN, HX90HUE, HX90HUEN, HX90HUI, HX90HUIN). Using an incorrect model may cause malfunction.
  
• DO NOT order based solely on appearance or model number.
  ALWAYS remove your existing switch from the armrest and verify its serial number before purchasing.
  
• To determine compatibility, check the serial number on the barcode sticker. This switch ONLY replaces units with the exact serial prefixes listed below, followed by a number or "V": SN:E90HULA, SN:WT90HULA, SN:ZE90HULA (Refer to the detailed image guide for location/format verification).
  
• If your switch's serial number does not match the prefixes above, do not order this switch.

Package includes:

• 1x HX90HULA switch
  
• 1x Aluminum switch cover
  
• 2x Mounting screws.