{"product_id":"emomo-nhx034ka8hl-10-button-remote-controller-for-recliner-lift-chair-with-8-pin-right-angle-male-plug-and-lcd-screen","title":"eMoMo NHX034KA8HL 10-Button Remote Controller for Recliner Lift Chair with 8-Pin Right-Angle Male Plug and LCD Screen","description":"\u003cul\u003e\n\u003cli\u003eThis is the genuine eMoMo NHX034KA8HL remote controller, featuring ten buttons and an 8-pin male plug. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt is designed for power recliners and lift chairs with one motor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis remote controller operates the chair open\/close and controls its heat and vibration functions.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis remote controller is not cross-compatible with other eMoMo NHX03 models. The NHX03 family includes many sub-models that are not interchangeable even if they look identical, and the label may only read \"Model: NHX03\". \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo confirm this remote controller will replace yours, please carefully check the Serial Number (SN) on the barcode sticker. The SN must meet all three requirements below:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePrefix: The SN usually starts with SN:E, SN:ZWT, or SN:ZE.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSub-Model: The characters immediately after the prefix must be exactly NHX034KA8HL or 034KA8HL.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuffix: The character immediately after NHX034KA8HL (034KA8HL) must be a digit (0–9) or the letter V.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe serial number can be found on the remote controller and the junction box. If the serial number on your remote controller is no longer readable, you can tip the chair over to check the serial number on the junction box from the downside of the chair.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf yours does not match these requirements, send a photo of the barcode label to our customer support by email or through the form below, and we will help you find the correct replacement model.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number: NHX034KA8HL\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eButton Count: 10\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug Count \u0026amp; Configuration: 1 × 8-pin male plug \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 29V DC, 2A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: 59W max\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable Length: 1.45m\/4.76ft\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10-Button Control: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eOperates the chair Open\/Close\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTurns heat ON\/OFF \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTurns vibration ON\/OFF \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperates the vibration intensity, vibration area, vibration modes. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSets the time duration. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8-Pin Right-Angle Male Plug: Features an 8-pin right-angle male plug to connect to the control box. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLCD Screen: Shows time, zones, intensity level, current mode, and other status readings. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTroubleshooting\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA common issue with this remote controller is a short circuit in the vibration motor or heating plate. Any of these can prevent the remote controller from functioning properly. Follow the steps below to find out which component is at fault.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDisconnect All Connections:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eTurn the chair upside down.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLocate the junction box.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnplug every cable from the junction box.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTest the Remote Controller:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eReconnect only the remote controller, lifting motor, and power adapter.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTry using the remote controller.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIf it works: the fault is in one of the components you unplugged. Reconnect them one at a time; the one that makes the remote stop working is the faulty part. Leave it unplugged.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf it still doesn't work: the fault is in the remote itself or the control box.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Includes\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × eMoMo NHX034KA8HL Remote Controller\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Life Easy Supply","offers":[{"title":"Default Title","offer_id":67967714230505,"sku":"LES-YK-1244","price":53.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0262\/8465\/4644\/files\/eMoMo_NHX034KA8HL_10-Button_Remote_Controller_for_Recliner_Lift_Chair_with_8-Pin_Right-Angle_Male_Plug_and_LCD_Screen.jpg?v=1794376810","url":"https:\/\/lifeeasysupply.com\/products\/emomo-nhx034ka8hl-10-button-remote-controller-for-recliner-lift-chair-with-8-pin-right-angle-male-plug-and-lcd-screen","provider":"Life Easy Supply","version":"1.0","type":"link"}